Skip to content
Menu
Two Stroke Tuning
  • Home
  • Topics
    • Tuning
    • Troubleshooting
    • Carburetor and inlet
  • Interesting reading
  • Calculators
  • Glossary of terms
Two Stroke Tuning

Category: Carburetor and inlet

Reed petals and intake valve – four things you need to know.

Posted on by admin

1. What is reed valve? What are reed petals? How do reed valve works? From wikipedia: Reed valves are commonly used in high-performance versions of the two-stroke engine, where they control the fuel-air mixture admitted to the cylinder. As the piston rises in the cylinder a vacuum is created in the crankcase beneath the piston. The resulting pressure differential…

Carburetor adjustment procedure and jetting

Posted on by admin

These instructions are intended to be followed by an experienced mechanic whom has a thorough knowledge of off road motorcycles, carburetor assembly, and tuning techniques. If this does not describe you please stop and seek professional help as engine damage and serious injury can result from improperly assembled and tuned carburetors. Do not attempt to…

About me

There are loads of information concentrated on this page, which I hope will help you on your way to make your engines faster.

more…

Tags

2stroke tuning carburetor carburetor jetting cause of detonation detonation Gordon Jennings Graham Bell handbook jetting motocross tuning Oil fuel ratio piston failure piston seizure tuning two-stroke troubleshooting two stroke oil ratio. two stroke tuning
©2023 Two Stroke Tuning | Powered by WordPress & Superb Themes